当前位置:网站首页 > 新闻资讯 > 行业资讯
行业资讯
  • 排烟风机故障原因有哪些
  • 本站编辑:度能环保发布日期:2018-10-08 14:41 浏览次数:
1、消防排烟风机的叶片的角度变形了或者弧度发生扭曲,主要是由于叶轮上的油污导致的,他会导致风量全压参数的下降,排烟的效果就会不明显。
 
1. The angle of the blade of fire exhaust fan is deformed or the radian is distorted, which is mainly caused by the oil stain on the impeller. It will lead to the decrease of the total pressure parameters of the air volume, and the effect of smoke exhaust will not be obvious.
 
2、叶轮上有大量的污垢同样会让叶轮运转时不能保持平衡,而且其振动性会加大,造成了轴承的损坏。
 
2. A lot of dirt on the impeller will also make the impeller run unbalanced, and its vibration will increase, resulting in bearing damage.
 
3、在遭遇特殊天气的时候,如果仍然在继续运行消防风机,且不是在遮风避雨的地方,很容易造成消防风机不同程度的腐蚀,这样就造成了风机的损坏。
 
3. When encountering special weather, if the fire fan is still running, and not in shelter, it is easy to cause varying degrees of corrosion of the fire fan, thus causing damage to the fan.